Products Products
Products / Products
Release Time: 2015 - 11 - 04
FDSP can manufacture the ring dies of different materials, types and hole diameters which are suitable for all top brand pelletizers, such as ANDRITZ, CPM, BUHLER, ZHENGCHANG, MUYANG, SHENDE etc Please offer the drawing and specifications of ring dies if you need.Dies-steel mouldFDSP dies are manufactured in the following steels:· X46Cr13 (i.e."stainless" steel or "chrome-steel") · 20MnCr5 (i.e."alloy" steel)· 18NiCrMo5 (i.e. similar to 20MnCr·5 but with a higher alloy content).The X46Cr13 steel dies are vacuum / through hardened. The heat treatment achieves 53-55HRc hardness on the surface and in the core. The high chrome content makes it corrosion resistant. Although it costs more than a normal alloy, X46Cr13 is by far the most common mat...
Release Time: 2015 - 11 - 04
CPM pellet press die characteristics 1.Advanced, automatic ring die processing technology: Full automatic CNC ring die drilling machine and vacuum heat treatment technology ensure the quality and working life of ring dies. 2.Rich ring die processing experience ensures the depth and opening ratio of the hole of ring die which can satisfy different requirements of poultry, livestock and aqua feed, thus improves the pelleting efficiency. 3.The surface of ring die is of good smoothness, high hardness, and the completed pellets are of good shape and neat appearance. 4.Quick discharge, high output and the production efficiency of the same size are much higher than ring dies of other brands. 5.Different types and hole diameters can be processed. Material selection Different ring die materia...
Release Time: 2015 - 11 - 17
Muyang ring die fixed by bolts characteristics1.Full automatic CNC ring die drilling machine is applied. The whole ring die processing is fully automatic controlled, and the holes of good smoothness are shaped at a time 2.Vacuum heat treatment technology reaches the most suitable working condition, which ensures the stability of ring dies.3.Smooth holes make sure that pellets are of high output and quality.4.Long working life5.Different types and hole diameters can be processed.Quality measurement of thermal treatment (1)Hardness For each ring die, after thermal treatment, at least 8 points shall be measured on both sides of the ring die and inner circle surface by sclerometer. The surface hardness shall be as follow: stainless steel: HRC52-55, alloy steel: HRC60-62; the differences betwee...
Release Time: 2015 - 11 - 16
Roller shell, commonly known as roller, is one of the main parts of pellet mill. It can be used to process various biofuel pellets, animal feed and other pellets.Now we have the roller shells of different shapes, such as:close-end grooved roller shell, honeycombed roller shell, drum-hole groove roller, open-end grooved roller shell, deflective-grooved roller shell etc.1.All roller-shells are manufactured using high carbom steels.2.All roller-shells are surface-hardened up to 58-62HRC3.Hardening depth is 6-7mm for C50 steel.4.The heat treatment is characterized by uniform hardening and hardening depth to ensure maximum durabilty.5.All our products are finished by skilled staff.6.Roller-shell surface hardening is tested before delievery to ensure premium quality. Open-end grooved roller...
Release Time: 2015 - 11 - 16
Honeycombed roller shell characteristics:1.Honeycombed roller shell is mainly applied to pelletize poultry feeds. The advantage is that it is uniform wearing,but has bad material intake performance. Large frictional force makes easy polishing.2.Material: Alloy steel, spring steel and bearing steel.3.Special thermal treatment ensures better wear resisting, and pelletizing performance.4.Long working life Roller shell, commonly known as roller, is one of the main parts of pellet mill. It can be used to process various biofuel pellets, animal feed and other pellets.Now we have the roller shells of different shapes, such as:closed-end grooved roller shell, honeycombed roller shell, drum-hole groove roller, open-end grooved roller shell, deflective-grooved roller shell etc.FDSP can manufact...
Products Mixer
Product characteristics:Mainly applied to transmit and pull for helical belt, and double-shaft paddle mixing machine.
Product Characteristics:Ribbon is driven and twined in the mixer and mix the material rapidly, which ensures good mixing performance and extreme low fault rate.
Product introductionLimit switch is an electric switch to limit the extreme position, which is also a normal master control electrical appliance. It can be divided to contact type and non-contact type. During actual mixing, limit switch shall be installed in prearranged place. When the machine component strikes travel switch, the limit switch acts and results to circuit switching. In conclusion, travel switch is to change the circuit according to component location, which is like the button.
Product introduction:Paddle is one of the important spare part of mixerFeatures:Stainless steel can be divided into disc paddle and three paddles according to the raw material. Paddle is driven by motor through triangle adhesion tape. Material moves along pot wall along with up and down circle turning with clock-wise turning of paddle. Processed guide plate makes better mixing effect. Because of high-speed operation of material, there is large grinding heat between pellets and between pellets and paddles. The rapid growing temperature of material not only reduces heat quantity of pot wall, but also makes for better absorption of plasticiser by resin. The paddle is made of stainless steel.
Function: Convert compressed air power to mechanical power so as to make machine linear reciprocate, swing and rotate. Working Principles:Determine thrust and pulling force on piston rod according to working force. Then the output force of the chosen air cylinder shall be remained. Small cylinder makes less output force, which results to air cylinder not working properly. However the air cylinder with too large diameter not only makes heavy equipment and high cost, but also makes large gas consumption and waste. For clamp designing, force amplifier shall be applied so as to reduce air cylinder size.
Product characteristics:1)Magnetic valve, electromagnetic controlled is automatic basic component to control fluid. It is a kind of executor not limited to hydraulic or pneumatic.2)Expected control can be realized by cooperating with different circuits. In addition, The controlling accuracy and flexibility can be guaranteed.
RFL is made of carbon steel or stainless steel, which is a kind of pressure vesselWorking principle:A large amount of hydrous steam goes into the RFL, and moves along centrifugal title down direction. The contained moisture will be separated by lowered speed. The separated moisture goes down to the drain valve and expelled out, while dry and clean steam goes out from separator.Features:Highest separation efficiency (dryness reaches 99%) and lowest pressure drop (around 5‰); construction is designed according to pressure vessel. Steam separator is a kind of pressure vessel made of carbon steel or stainless steel. For steam containing air, air vent is designed on the separator.
Product characteristics:Applicable to chain driving of helical tape and double-shaft paddle mixing machine.
Copyright ©2005 - 2013 Jiangsu liangyou International Mechanical Engineering Co.,Ltd
ADD: No.19 Suyuan Avenue, Nanjing 211100, China